Autel PowerScan PS100

Autel PowerScan PS100

PowerScan PS100


Product Description

The PowerScan Tool Circuit Tester electrical leads built in flashlight, enables you to work in the dark, comes with AVOmeter, test light, short circuit indicator, relay/component tester, continuity tester and bad ground indicator. It is easy to use and affordable.Diagnostic Tool

https://www.youtube.com/watch?v=J03quHCJvJs

Περιγραφή:

Το PowerScan Tool είναι ο πιο επαναστατικός ελεγκτής κυλωμάτων μέχρι σήμερα. Διαθέτοντας AVOmeter, δοκιμαστική λυχνία, ενσωματωμένο φακό, ένδειξη βραχυκυκλώματος, ελεγκτή ρελέ/εξαρτημάτων, ελεγκτή συνέχειας και ένδειξη κακής γείωσης, το PowerScan είναι πραγματικά το απόλυτο σε ισχύ και οικονομικά προσιτή τιμή, επιτρέποντας στους χρήστες να ελέγχουν τα κυκλώματα με ένα μόνο βήμα. Ένα απόλυτο must για κάθε τεχνικό που αναζητά μια γρήγορη και με ακρίβεια λύση για τη διάγνωση ηλεκτρικών συστημάτων.

 

autel-ps100-tester

Features:

Performs every type of service including power injection, measurement, ground testing, polarity checks, continuity testing and components activation
Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip
With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc.
Simultaneously uses the hot lead and the ground lead to activate components right in your hand
Instantly identifies positive, negative and open circuits
Tests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses
Instantly checks continuity of switches, relays and diodes
Circuit breaker protected
Built-in Flashlight enables you to work in the dark
Audio tone indicator allows for no-look menu scrolling once users are familiar with menu tone assignment
20ft (extendable) cable provides excellent accessibility to test along the vehicle
Extremely easy to use and highly reliable

powerscan-ps100-1

Benefits of the PowerScan PS100

  • Recessed lighting for use in dark areas
  • Circuit breaker
  • Specific function display
  • Very reliable and easy to use

Specifications:

Display:     TFT color display (160 x 128 dpi)
Operating Temperature:   0 to 60°C (32 to 140°F)
External Power: 12.0 or 24.0 V power provided via vehicle battery
Length\Width\Height: 126mm(4.96")\46.5mm(1.83")\35mm(1.38")
NW: 0.105kg (0.23lb),GW: 0.726 kg(1.6lb)

Autel PowerScan PS10 Work Mode:

There are four modes to diagnose the electrical systems, which can be accessed by depressing the Mode Button and cycling through each
one.

DC Voltage
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the DC voltage with a resolution of 0.1 volt.
autel-ps100-mode-1
AC Voltage
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the Max. voltage, the Min. voltage, frequency and duty cycle.
autel-ps100-mode-2
Resistance
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.
autel-ps100-mode-3
Tone On/Off
While the tool in this mode, just do a quick press of the mode button to toggle the tone on or off. While quickly pressing (a quick press and release) the mode button, if a short high beep is heard, this means the audio tone is turned on. If a short low beep is heard, the audio tone is turned off.
autel-ps100-mode-4
This function is invaluable when working in bright areas where LED illumination alone is not sufficient. The audio feature may be disengaged when desired, such as for applications where the tool will be connected to circuits for long periods of time and the audio could become annoying.
 

A number of measurement examples:

Measuring resistance
powerscan-ps100-2
By using the extra mass cable, the resistance across plugs and switches can be measured.

Consumer testing
powerscan-ps100-3
With the +/- button on the tester, the consumer can be checked by tensioning it directly.

Circuit test (plus switched)
powerscan-ps100-4
By directly tensioning the trailer plug, the complete circuit can be tested.

Circuit test (mass switched)
powerscan-ps100-5
Components connected to mass, such as a claxon, can easily be controlled by massaging the claxon via the tester.
 

Package list:

1 × PowerScan PS100
1 × Rugged blow molded case
1 × 20ft. extension cable1 × Probe tip
1 × Battery hookup clips
1 × Cigarette lighter adapter
1 × User's Manual

European Service Training Center
Κέντρο Τεχνικής Εκπαίδευσης
και Υποστήριξης 

Στοιχεία Επικοινωνίας

(+30) 2105781341

Απίστευτη δουλειά, τρομερή τεχνική υποστήριξη. Συγχαρητήρια!!!

Stefanos Kargakis

Το όραμά μας

Στόχος του e-STC είναι η εκπαίδευση και ενδυνάμωση των ατόμων σε βασικές ικανότητες αλλά και σε ειδικές τεχνικές επαγγελματικές γνώσεις για την καλύτερη αντιμετώπιση των καθημερινών προκλήσεων στο χώρο εργασίας τους και την αναβάθμιση των υπηρεσιών που προσφέρουν!

© Copyright 2020 - 2024 E-STC - All Rights Reserved